The series includes two models: the UNI FAN TL LCD Wireless, equipped with a 1.6-inch LCD display for customizable visuals, and the UNI FAN TL Wireless, featuring high-performance Liquid Crystal Polymer (LCP) blades for optimized cooling. Both models incorporate an infinity mirror effect, dual LED zones, and are available in black and white color options. Designed in a standard 120 mm size, these fans support regular and reverse airflow configurations for greater flexibility.

UNI FAN TL LCD Wireless

The UNI FAN TL LCD Wireless introduces a 1.6-inch LCD IPS display positioned at the center of the fan. With a resolution of 400×400 and a refresh rate of 60 FPS, it supports MP4, GIF, JPG, and PNG file formats, enabling users to personalize their builds with vibrant and dynamic visuals. Compared to its predecessor, the UNI FAN TL LCD, which offered a 30 FPS display, the new model delivers smoother animations and enhanced visual clarity.

Infinity mirrors surround the fan edges, complemented by a thin LED strip that wraps around the mounting screw area for a sleek and modern appearance. Performance-wise, the fan leverages fluid dynamic bearings (FDB) to achieve an airflow of 62 CFM, air pressure of 2.9 mmH2O, and an operational noise level of 27 dBA at a maximum speed of 1900 RPM.

To simplify installation and operation, the LCD receiver connects via a PWM cable for power and a USB cable for the LCD signal, ensuring compatibility with existing systems.

UNI FAN TL Wireless

The UNI FAN TL Wireless focuses on performance with LCP blades designed for high-speed tolerance and reduced vibration. Coupled with FDB technology, the fan achieves an impressive airflow of 90.1 CFM, air pressure of 3.97 mmH2O, and a noise level of 33 dBA at a maximum speed of 2600 RPM.

Aesthetically, the fan features an aluminum logo at its center, concealing the copper shielding of the bearing while maintaining a premium look. Each fan or group connects wirelessly to the system via a receiver powered through a motherboard PWM header, eliminating cable clutter and simplifying setup.

L-Wireless SYNC Controller and Universal Receiver

Both models in the UNI FAN TL Wireless series are managed via the L-Wireless SYNC Controller, a compact USB device that operates on a 2.4 GHz wireless signal. The controller allows users to adjust fan speeds and lighting effects, either through a connection to the motherboard’s rear I/O USB port or via a USB 2.0 header and PWM header. It supports up to 10 fan groups, ensuring scalability for complex builds.

The TL Wireless series fans utilize a clip-on receiver compatible with both the TL and SL Wireless series. The TL Wireless receiver powers LEDs and the fan motor via a PWM cable, while the TL LCD Wireless receiver requires an additional USB 2.0 connection for the LCD signal. For larger setups, users can opt for a SATA-powered 9-pin USB hub or LIAN LI’s EDGE PSU with an integrated 4-port USB hub to manage additional LCD fan groups.

Availability and Pricing

The UNI FAN TL Wireless series will be available for pre-order starting December 20, 2024. These fans mark a significant step forward in wireless technology for PC builds, offering users enhanced customization, simplified installation, and robust cooling performance.

The post LIAN LI Expands Wireless Product Line with UNI FAN TL Wireless Series appeared first on XiaomiToday.

Dual-System Capability and Spacious Layout

The DK07’s layout accommodates both single and dual-system configurations, with a modular rear bracket that simplifies transitions between setups. This adaptable bracket enhances compatibility and installation convenience, while each system tray supports E-ATX motherboards, CPU coolers up to 180 mm, and graphics cards up to 383 mm in both horizontal and vertical orientations (a separate riser cable is required for vertical GPU mounting). To ensure effective cooling, the desk provides mounting support for radiators up to 360 mm in size and offers multiple fan configurations, including up to twelve 120 mm fans or six 120 mm and four 140 mm fans. Additionally, the front radiator brackets allow for flexible cooling options, supporting 480 mm or 420 mm plus 240 mm radiators.

For users requiring extensive storage, the DK07 includes space for up to six 3.5″ HDDs at the front. This modular design allows the desk to easily adapt to specific cooling and storage needs, offering an efficient and high-performance workspace for power users and gaming enthusiasts alike.

Enhanced Cable Management and Connectivity

LIAN LI has integrated effective cable management solutions into the DK07, ensuring a tidy workspace that minimizes clutter. Built-in cable clips at the back of the desk provide pathways for monitor and peripheral cables, while a large underbelly cable tray and two spacious organizer drawers at the front offer additional storage. To keep devices powered, the desk’s top right corner features an independently powered wireless charging pad, complete with a concealed pop-up section housing USB Type-C and Type-A ports for power delivery.

Each system is equipped with front I/O panels that include dual USB Type-A and dual USB Type-C (USB Gen2x2) ports capable of up to 20 Gbps transfer speeds, along with audio and microphone jacks for convenient device connectivity. These features ensure that all essential devices remain accessible and that cables are kept out of sight, contributing to a streamlined and functional workspace.

Sleek Design with Height Adjustability

The DK07 stands out with its motorized height adjustment, offering smooth transitions between sitting and standing positions with a range from 676 mm to 1162 mm. Users can control the height with manual adjustments or utilize three programmable presets for quick access to preferred positions. The desk’s aesthetics are elevated by a 2 mm thick brushed aluminum exterior, combined with a 6 mm tinted tempered glass top, which offers a refined look into the system beneath while maintaining durability.

Pricing and Availability

The LIAN LI DK07 motorized desk is available starting November 7, 2024, with a recommended retail price of $1,399.99. This latest addition to LIAN LI’s desk series aims to provide a balanced solution for both aesthetics and functionality, catering to users who prioritize both performance and a clean, organized workspace. Further details can be found on the LIAN LI product page.

The post LIAN LI Introduces the DK07 Motorized Standing Desk with Dual-System Support and Enhanced Cable Management appeared first on XiaomiToday.

Today, we’re delving into the world of XL cases with Lian Li’s latest addition to the O11 Dynamic series – the EVO XL. Retaining the beloved design elements of its predecessors, this model introduces a larger form factor to accommodate ambitious builds. With support for up to three 420mm radiators, it’s a dream for water-cooling enthusiasts. Despite its robust capabilities, the O11 Dynamic EVO XL maintains a competitive price of $234.99, making it appealing to both gamers and PC enthusiasts. Join us as we dive into a comprehensive review, exploring its features and assessing its real-world performance.

The O11 Dynamic EVO XL by Lian Li is a game-changer in PC cases, offering optimized features for upgrades and new builds. With side graphics card installation, removable edge rods, and a flexible motherboard mount, it blends top-notch design with unmatched functionality. For gamers seeking the best, this case is the ultimate choice, setting a new standard in excellence. Join us as we delve into why it’s the go-to option for serious builders everywhere.

Specifications

Unboxing

The O11 Dynamic EVO XL comes in khaki packaging provided by Lian Li, featuring a sketch of the case and its model name on both sides. However, there are no additional details or specification data included. Only the model and color are indicated on the side corners. In this unboxing, we have the white version of the O11D EVO XL.

Within the packaging, the housing is shielded by two foam pads, ensuring its safe arrival to the buyer intact, even without additional outer packaging. The accessories are contained in a small box, housing various components including a graphics card support bracket, double-layer cable management buckle, air duct baffle, Lianli nameplate, a small box of sorted screws and buckles, cable ties, and installation instructions. Additionally, it includes 3 magnetic gauze dust-proof nets as a standard feature, enhancing its dust-proof capabilities.

Design

Exterior

As you open the box containing the O11 Dynamic EVO XL, you’re met with a commanding tower exuding a sleek, modern design. What truly catches the eye, however, are the striking, expansive real glass elements that scream sophistication tailored for gamers. Lian Li’s dedication to precision is evident in every detail, from the sturdy, frameless real glass panel gracing the side of the chassis to the substantial 4mm thick real glass panel on the front, promising both a visually stunning appearance and unmatched durability.

Measuring 522×304×531.9mm and weighing 17kg, this case is undeniably substantial. Yet, its transparent view offers a unique twist, revealing the inner workings and mitigating its seeming enormity. Designed to accommodate E-ATX motherboards and CPU water cooling setups, it promises remarkable functionality. Furthermore, it inherits the versatile feature from its predecessor, the O11D EVO, enabling seamless switching between left and right modes, ensuring convenience for users.

The O11D EVO XL boasts a striking 4mm thick glass panel on its left side, contributing to its considerable presence. Due to its weight and size, cautious handling is essential to prevent unintended damage. Notably, the joints between the two glass panels utilize a bevel design, a thoughtful touch aimed at reducing wear and tear during maintenance tasks. This attention to detail enhances the product’s durability and ensures a longer lifespan.

The Lian Li O11 Dynamic EVO XL showcases a stunning blend of durability and style with its brushed aluminum alloy shell, delivering both robustness and visual elegance. Its premium tactile experience enhances the chassis’s overall feel, while the seamless integration of clear real glass and aluminum cover is achieved through a clever 3mm wide, slightly transparent plastic strip, serving as a diffuser for concealed ARGB lighting. Accentuating its allure is a mesmerizing ARGB light bar nestled between the metal shell and the glass panel, elevating its aesthetic appeal when illuminated.

The O11D EVO XL boasts a user-friendly front panel design, with the power switch conveniently placed on the right side for easy access. Positioned at the bottom are pre-installed IO ports, including 4 USB 3.0 ports, 1 USB Type C port, 1 Audio jack, and dedicated buttons for LED color and mode control. Retaining the switch configuration of its predecessor, the O11D EVO, the XL model features a power switch spanning the front and right side, enabling dual-directional pressing. It also includes dedicated buttons for resetting and managing ARGB light strip modes and colors.

The case’s upper cover features two distinct sections: a perforated aluminum alloy ventilation area and a compartment housing the hard drive and power supply. Lian Li’s website highlights a 14% increase in perforation compared to its predecessor, the O11D XL, promising improved heat dissipation. Hand-turn screws secure each section, allowing easy removal for maintenance. Disassembly unveils a magnetic PVC filter, adding protection against dust and debris.

The case’s upper cover and right side panel are made of durable aluminum alloy, featuring elongated strips of generously sized apertures. The front aperture houses the air intake fan, while the rear enables access to the power supply and supports hot swapping. A dedicated fan cools hard disk racks, and a PVC magnetic filter inside the right panel captures dust. Metal magnetic strips cleverly secure the filter despite aluminum’s non-magnetic nature.

The Lian Li O11D EVO XL showcases a dual-chamber layout at its rear, echoing the design language of the esteemed O11 series. In the primary component section, users are greeted with 8 PCI-E slots and a designated area for a 12cm fan. What sets it apart is the flexibility afforded by a movable baffle, allowing for the addition of two more 12cm fans, thereby improving airflow and bolstering cooling performance.

Beneath the dual-part housing cover rests a centralized rubberized cable or hose feedthrough, while an extra air outlet is situated just below it on the case’s rear right, adjacent to the I/O shield cutout. This outlet is designed to host two 120 mm fans, offering versatility for different case setups. On the opposing side, to the left of the I/O panel space, the case rear boasts a built-in slot for securely installing an ATX power supply unit.

The Lian Li O11 Dynamic EVO XL features strategically placed air outlets below and above the mounting location to enhance airflow around the installed HDDs. With eight expansion slots, each equipped with perforated slot covers, the case offers ample room for expansion. Assembly is made quick and hassle-free with the use of folding metal panels secured by knurled screws, eliminating the need for traditional screws.

At the bottom of the case, a noticeable air inlet mirrors the design of the outlet above, capable of hosting three 120mm or 140mm fans and shielded by a detachable dust filter. Adjacent to this, two slots await I/O panel connections. The case rests securely on four square plastic feet, each equipped with rubber decouplers for stability and vibration reduction.

Interior

The Lian Li O11 Dynamic EVO XL stands out for its exceptional visibility, featuring dual glass panels that showcase its interior. For a full appreciation of its intricacies, removing the side walls is necessary. Notably, the EVO XL enables the removal of the front left corner support structure, elevating visibility to new heights. This design element caters to enthusiasts, offering a clearer and unobstructed view of the case’s interior, amplifying its appeal.

The two areas’ upper covers are secured with hand-turn screws, revealing magnetic PVC filters beneath. These filters protect the air inlet from dust. A fine dust filter, seamlessly integrated just below the mesh grille, is held in place by built-in magnets, making it easy to remove for cleaning. The top fan rack features a modular, removable design, accommodating up to 3×140/120mm fans, while the bottom and side fan racks mirror this convenient setup.

The modular design of the plastic cover enables flexible routing options for the I/O panel’s external connections, accommodating placements on both the left and rear sides of the housing. With three installation positions for the bottom IO—front, left, and rear—the rear option is commonly favored when installing the motherboard upside down. This adaptability allows for convenient customization to meet diverse setup requirements and user preferences.

The IO cable features a versatile wire loop, adaptable to front or rear mounting, secured effortlessly with buckles. Its user-friendly design facilitates swift disassembly and reconfiguration, eliminating the need for extra tools during adjustments.

The nylon bottom filter features a user-friendly design, allowing for easy removal by simply pulling from the side. Its ergonomic construction ensures that both positioning and disassembly/assembly are intuitive, emphasizing user comfort and convenience.

The O11D EVO XL maximizes airflow and functionality with its intelligently designed internal layout. Split into three sections, the right side of the case ensures efficient cooling with a dedicated fan zone at the front, while the middle portion handles cable management and space for 2.5-inch devices. Towards the rear, it accommodates the power supply unit and features a convenient hot-swappable hard drive bay, offering a comprehensive storage solution without compromising airflow efficiency.

The O11D EVO XL boasts a user-friendly design with convenient hot-swappable hard drive racks positioned both on the upper and lower sides, each capable of holding two 3.5-inch storage devices. These racks can be smoothly pulled out at a 45-degree angle for easy removal and installation of hard drives. Within the rack, trays are securely fastened with hand-turn screws, eliminating the necessity for extra tools and streamlining maintenance procedures. Notably, the integration of modular hard drive frames and an integrated backplane allows for hot-swapping of hard drives during operation.

Nestled between two sturdy hard drive racks rests the designated area for the power supply unit, accompanied by a compact support bracket ensuring stability. However, it’s regrettable that both the positioning of the hard drive racks and the central power supply unit are fixed, offering no flexibility for adjustments or replacements.

The mainboard tray in the housing showcases Lian Li’s meticulous engineering with its intricate, multi-layered design. Its clever construction allows for easy detachment, streamlining motherboard installation effortlessly. Moreover, its adaptable mounting heights cater to diverse preferences and requirements, demonstrating Lian Li’s commitment to flexible and user-friendly design.

Lian Li’s attention to detail shines through in their design, where motherboard mounting spacers are seamlessly integrated into the tray, simplifying assembly. Their mainboard carriage includes a generously sized recess for easy cooler installation. Notably, the division wall separating chambers features six rubberized cable ducts, four lower and two higher up, ensuring efficient cable management with a touch of style.

The side fan cover features two cable ducts positioned at a 90° angle, facilitating smooth cable management. Designed with precision, it seamlessly integrates air inlets on the case’s top and bottom, supporting three 120 mm or 140 mm fans. Additionally, this versatile cover enables the installation of a radiator of up to 420 mm in size, providing optimal cooling solutions for high-performance setups.

The case is designed with a top air outlet for efficient airflow management and a bottom mounting panel that supports the installation of three 120mm or 140mm fans, or a compatible radiator setup. This thoughtful design enhances cooling capabilities, ensuring optimal performance for the system’s components.

The structural integrity remains impressive even after the A-pillar is removed, showing minimal sinking when subjected to pressure. Secured by two screws at the top and bottom, the A-pillar’s stability is evident. Lian Li advises reinstalling the A-pillar for transportation, emphasizing its importance in maintaining the casing’s structural integrity during transit.

Overall, the O11 Dynamic EVO XL exemplifies Lian Li’s dedication to precision and quality craftsmanship.

Installation

Before diving into assembling the hardware, consider the optimal placement of the case on your desk and whether you prefer water or air cooling for your system. Lian Li presents the O11 Dynamic EVO XL in two color options, offering versatility through its modular design. By swapping the left and right side walls, as well as the case base and cover, you can achieve an inverted layout. This unique feature allows you to view your installed hardware from both the left and right sides of the case, ensuring an optimal viewing experience.

We start by removing the motherboard tray to make things easier. This enables the seamless installation of the CM-CPU-GPU assembly outside the case, which can then be reinserted in one swift motion. While removing four front-hand screws may seem a minor inconvenience, we offset it with a user-friendly tool-free system for the PCIe slots. Additionally, adjusting the support’s height is a breeze—simply reposition the brackets at the bottom and top to move it up or down by 3.5 cm as needed. This ensures a smooth and efficient setup experience.

After completing the installation, ventilation supports are removed from the top and side to accommodate the blower. We opted for Six Uni Fan SL-Infinity 120 ARGB Fans, with a configuration of 3 fans each on the top and bottom. Additionally, the GALAHAD II LCD 360 SL-INF AIO Liquid Cooler was effortlessly installed on the side. All mounts are designed to be compatible with either 360 or 420mm radiators, ensuring flexibility and ease of use.

With the upright GPU bracket, you have the flexibility to install your GPU outside the case and easily reposition it when needed. Thanks to the side bracket, you can choose whether to have the GPU ports at the top or bottom. Additionally, a separate PCIe riser cable, 900mm in length, ensures ample space for efficient cable management. Installing the graphics card on the side enables the addition of three fans at the back, optimizing heat dissipation by directing airflow directly onto the GPU backplane.

Installing the components proves to be remarkably convenient with easy access from all sides within the case. The provided loops and covers facilitate smooth cable management, aided by the included cable ties. Removing the 3.5″ HDD cases further optimizes space utilization. Even installing power supply cables on modular units is a hassle-free process, eliminating the risk of finger strain or cable bending. With everything set up, it’s time to conduct a temperature check.

The O11D EVO XL front glass panel features an eye-catching ARGB light bar positioned on its right side. However, an intriguing visual effect is created by the ARGB illumination between the left side and the side panel glass, effectively producing the illusion of an additional ARGB light bar on the right. Lian Li’s inclusion of RGB elements pre-installed in the front housing lays a solid groundwork for this captivating feature, enhancing the overall aesthetic appeal of the chassis.

Testing and Performance

The Lian Li O11 Dynamic EVO XL offers an exceptional platform for PC building with its spacious full tower design. Its generous proportions greatly enhance the building process, allowing ample room for components and ease of assembly. Within this case, I constructed a powerful system tailored to my needs, leveraging its expansive layout to optimize performance and aesthetics.

	Test Setup
Motherboard	MSI MPG Z690 FORCE WIFI DDR5
Processor	Intel® Core i7-13700K
RAM Memory	Predator Hermes RGB DDR5 – 6800MHz
Storage	Silicon Power US70 1TB NVMe SSD
Graphic Card	ASUS ROG Strix GeForce RTX 3080 OC Edition (10GB)
CPU Cooler	Lian Li GALAHAD II LCD AIO
Casing	Lian Li O11 Dynamic EVO XL Full Tower Case
Fan	6x Lian Li UNI FAN SL-INF 120 RGB Fans

Cooling and AirFlow

Let’s delve into the cooling capabilities of the Lian Li O11 Dynamic EVO XL Full Tower Case. Testing it with an Intel® Core i7-13700K Processor on an MSI MPG Z690 FORCE WIFI DDR5 motherboard, and an ASUS ROG Strix GeForce RTX 3080 OC Edition graphics card reveals promising results. Even at idle, with a room temperature of 28°C, the processor maintains a steady temperature of around 47°C. Effective thermal management is essential to ensure peak performance and longevity of PC components.

After a 10-minute continuous FPU Stress Test on AIDA64, the Intel® Core i7-13700K Processor maintained a stable temperature of 69°C, with a core temperature of 85°C. The P core operated steadily at 4.8Hz, while the E core remained at 3.9GHz. No downclocking occurred during the test, indicating acceptable CPU temperature performance. The GPU temperature was held at a favorable 66°C.

In addition to lowering the maximum temperature, the capability of this system also lies in greater heat dissipation efficiency. After reducing the load on the CPU and graphics card, the temperatures of the CPU and graphics card drop off a cliff in a few seconds.

Overall, The heat dissipation performance of the Lian Li O11 Dynamic EVO XL impresses, effectively managing the thermal demands of mid-to-high-end hardware with proficiency.

Acoustics

The Lian Li O11 Dynamic EVO XL impresses not only with its exceptional performance but also with its remarkable quietness. During regular use, the entire PC build produces a mere 30 decibels of noise, a notable 3.4 decibels lower than its predecessor, rendering it virtually silent even during late-night sessions. Even under heavy load with cooling at maximum capacity, the noise level reaches only 41.5 decibels, a significant reduction from the previous case’s nearly 60 decibels.

Conclusion

Read Also

• Lian Li GALAHAD II LCD 360 SL-INF AIO Liquid Cooler Review
• Lian Li Uni Fan SL-Infinity 120 ARGB Fans Review
• HYTE Y40 Review: Premium Mid-Tower PC Case
• TEAMGROUP T-Force Siren GA360 ARGB AIO Liquid Cooler Review
• Yeston Zeaginal ZC-ZEUS XT360 CPU Liquid Cooler Review

The post Lian Li O11 Dynamic EVO XL Full Tower PC Case Review appeared first on XiaomiToday.

Manufacturers are responding to the increasing demand for personalized experiences by enhancing the versatility and customization options of liquid coolers. Lian Li, a key player in the field, has unveiled the GALAHAD II Series, featuring the GALAHAD II LCD AIO Liquid Cooler. This cutting-edge product represents Lian Li’s venture into liquid coolers with LCD screens, providing users with a unique platform to showcase images, videos, and real-time system data. With Asetek’s latest 8th Gen Solution and either pre-installed ARGB daisy-chainable radiator fans or UNI FAN SL-INF Fans, the Lian Li GALAHAD II LCD ensures both improved performance and aesthetics.

The GALAHAD II LCD AIO Liquid Cooler, available in 280mm and 360mm sizes and sleek black or white finishes, marks a notable advancement in aesthetics and functionality from previous models. This review centers on the 360mm white version outfitted with UNI FAN SL-INF Fans, examining its outstanding heat dissipation and overall performance prowess.

Unboxing

The outer packaging of the GALAHAD II LCD AIO Liquid Cooler prominently displays key details such as the brand, model, features, color, and appearance. A standout feature is the 2.88-inch IPD screen, emphasized on the front, distinguishing it from its predecessor, Galahad. The product name, GA II LCD – SL-INF 360, is abbreviated in the lower right corner due to the larger screen size.

Notably, the upper right corner advertises a 6-year warranty and includes three 120mm fans. The cooler’s compatibility with the latest Intel LGA1700 and AMD AM5 Platforms further underscores its modern relevance in computing setups.

The packaging of the Liquid Cooler is adorned with detailed specifications, prominently displayed on multiple sides. A QR code in the lower right corner offers easy access to the installation process for the proprietary Liquid Cooler software, L-connect 3, through scanning.

Eight key selling points are succinctly highlighted on the rear, providing consumers with a clear overview of its standout features before unboxing.

After opening the box, you can see that the three UNI FAN SL-INF fans have been pre-installed above the GALAHAD II LCD AIO Liquid Cooler. This is really very praiseworthy. The components are well-protected with a cardboard shell guarding against shocks and plastic bags enveloping the pump block, hoses, and radiator.

The package comes with an array of mounting hardware for both AMD and Intel sockets, accompanied by a concise installation guide. Additional accessories comprise cables for display and RGB lighting connections, along with fabric cable ties. Furthermore, it includes the L-Connect3 compatible ARGB Controller and associated cables.

Design

Radiator

The Galahad II LCD 360 radiator boasts a sleek and clean design, featuring a pristine white finish that highlights its superior craftsmanship and quality. Its sturdy construction instills confidence in its durability, while its 30mm thickness exceeds the standard 27mm, though slightly trailing behind the 32mm of the Galahad II Trinity PERFORMANCE VERSION. Overall, it offers both style and substance for efficient cooling performance.

With its compact dimensions of 399.5x120x30mm, this device boasts a tidy design. The meticulously arranged heat dissipation fins, featuring a 20 Fins Per Inch configuration, not only minimize airflow restriction but also complement the lower RPM capabilities of the 140mm fans, ensuring efficient heat dissipation across a larger surface area.

The Lian Li Galahad II LCD 360 water cooling system showcases a versatile design with a 45° tilted and rotatable tube, allowing for easy adaptation to various installation setups. Encased in durable nylon braiding, the 365mm water-cooling pipe ensures longevity and protection. Reinforced connections between the pipe, radiator, and CPU head enhance durability, while meticulously crafted joints enable 360° rotation, offering flexibility in cooling pipe routing. This innovative design enhances compatibility, ensuring seamless installation of the radiator for optimal cooling performance.

The radiator is presented in a side view, prominently featuring the “LIAN LI” branding on each side. Adjacent to it, intricate liquid exchange pipelines are displayed, highlighting both the functionality and design intricacies of the system.

CPU Block and PUMP with LCD Screen

The Lian Li Galahad II LCD stands out with its CPU water block featuring a 2.88-inch IPS screen boasting a resolution of 480×480, reaching up to 500 nit brightness and 24-bit Full Color depth. This innovative design surpasses traditional circular displays by offering a comprehensive showcase of system information including CPU and GPU temperatures, system loads, and coolant temperature.

Moreover, users can leverage the L-Connect3 software to capture and share images, GIFs, videos, and text. Enhancing the aesthetics, linear light strips on the cold head sides support ARGB divine light synchronization, elevating the overall ambiance of the setup.

The water block boasts a sleek aluminum panel outer frame adorned with ARGB light bars flanking each side. Measuring 72.15 × 73.05 × 61.98 mm, its compact dimensions ensure efficient cooling. Unlike some counterparts, the unit is firmly assembled, with its shell featuring a refined frosted anode surface—a hallmark of LIAN LI’s renowned integrated water cooling systems, as exemplified by the Galahad AIO predecessors.

The CPU water block features Asetek’s cutting-edge eighth-generation water pump, boasting a three-phase motor for enhanced flow and quieter operation at 3600 RPM. It outperforms its predecessor, delivering a notable 2°C/100W performance boost. Its high-speed capabilities not only elevate water flow and lift but also ensure a remarkable balance between quietness and efficiency.

The water pump block features two distinct cable interfaces for seamless functionality. A USB Type-C interface facilitates connection to the motherboard’s 9-pin USB header, enabling support for the L-Connect 3 function. Adjacent to the AIO pipe, a 12-pin interface serves to link the fan and SATA power connector efficiently. Additionally, a 4-pin PWM cable, extending from the base of the water pump block, enables precise RPM control, ensuring optimal performance.

The GA II LCD 360 block boasts a 55mm×55mm square copper base at its bottom, enhancing its heat conduction efficiency. Notably, it comes pre-coated with thermal paste, ensuring hassle-free installation once the protective cover is removed. Moreover, users benefit from an extra syringe containing around 0.5g of silicone grease, easing future reinstallation processes.

UNI FAN SL-INF Fans (Pre-Installed)

The Lian Li GALAHAD II LCD AIO Cooler (Review) comes equipped with pre-installed UNI FAN SL-INF Fans, each sized at 120 x 120 x 25mm and featuring FDB dynamic hydraulic bearings. These fans boast a maximum air volume of 61.3CFM, ensuring highly efficient cooling, complemented by a static air pressure of 2.66. With a flexible fan speed range spanning from 200 to 2100rpm, they offer adaptability to cater to diverse cooling requirements. Noteworthy is their remarkably low wind noise level of 29 dBA, ensuring whisper-quiet operation, making it a perfect fit for environments prioritizing noise reduction.

In the center of the back is the aluminum Lian li LOGO, surrounded by an ARGB aperture. The infinity mirrors on the top and bottom sides are surrounded by an aluminum frame. Based on the geometric shape of the infinity mirror, it presents a 3D infinity mirror effect under the illumination of the front ARGB light bar.

The appearance of the UNI FAN SL-INF fans continues the light effect design of the SL series. There is a slim LED light bar on the inner edges of both sides of the fan frame. More gorgeous RGB light effects are added to the sides of the frame and the center of the fan, with 0.5mm layering. The effect is that it can present a 3D deep infinity mirror effect from any angle.

The fan boasts a traditional block fan splicing design, effortlessly accommodating up to four fans and simplifying cable management. With a redesigned 7-pin power module cable, its interface cover can be easily removed, enabling flexible repositioning of the cable to the center or opposite side. This pioneering feature resolves installation complexities related to wire direction, guaranteeing a tidy setup when installing the radiator.

The included standard PWM and ARGB power cables can be used to control the fan through the motherboard or can be directly connected to the AIO water pump block that needs to be synchronized through the L-Connect 3 software.

Cables

The white AIO Liquid Cooler comes with a set of essential wires, including a USB 2.0 to USB Type-C cable for motherboard and water block connectivity, facilitating customizable display effects on the Galahad II LCD 360’s small screen. It also features a fan adapter cable compatible with PWM 4-Pin and SM types for easy connection to motherboards or LIAN LI controllers.

The CPU block synchronization cable, powered by SATA, enables synchronization of fan speed and lighting effects through the L-Connect 3 software. Completing the set is an SM type to 5V 3-Pin ARGB male connector, ensuring seamless synchronization of lighting effects across various devices.

Mounting Bracket

The Mounting Bracket set marks a significant advancement in Asetek’s 8th-generation water pump solution, designed to streamline the bracketing process effectively. Addressing past challenges of excessive brackets and reinforced back plates accommodating various foot positions, this iteration simplifies installation by categorizing brackets into two types, specifically tailored for Intel and AMD platforms.

The Lian Li GA II LCD 360 introduces a significant refinement by eliminating the need to replace the buckle on the CPU block. Instead, users only need to install or replace the base and reinforced backplane on the motherboard side. This streamlines the installation process, offering enhanced user convenience and compatibility across various processor configurations. Compatible with mainstream mid-to-high-end platforms including Intel’s LGA1700/1200/115X and AMD’s AM4/AM5, the GA II LCD 360 ensures versatility and ease of use in the market.

RGB Controller

The control box is an exclusive component bundled with the purchase of a 3-pack. Featuring four sets of 7-pin connection ports, it efficiently manages up to 16 fans. Additionally, it includes two 3-pin SM TYPE PORTs, each supporting a maximum output of 5W. Compatible with Galahad AIO Liquid Coolers and ARGB cables from the first two generations of UNI FAN SL, it enhances lighting effects but demands an increased power supply, necessitating two SATA lines. Players must take careful note of this requirement for optimal performance.

Installation

After finalizing the design phase, I’ll furnish you with detailed insights into the installation process. Following LIAN LI’s recommendations for optimal heat dissipation, we’ve opted to install the water cooling pipe downward, ensuring efficiency.

Notably, pre-installed fans on the radiator streamline the process, eliminating previous challenges of aligning fans and managing wires. The simplified procedure involves affixing the radiator onto the chassis and CPU Block, reducing complexities. The anticipated completion time for installation is around 10-20 minutes, highlighting its efficiency and user-friendliness.

L-Connect3 Software

L-Connect 3 software seamlessly integrates with the Lian li GA II LCD, offering comprehensive support. Within the information system options, users gain access to vital system status updates and recommended actions. Additionally, the software facilitates precise control over fan and water pump speeds, along with managing the cold head screen display, all conveniently accessible through the speed setting page.

After powering on, the default screen will be Lian Li’s white background and black mark LOGO. The screen can be set specifically in the options of the GA II LCD. Users can access custom themes and apply these themes on the LCD screen.

There are currently 14 special effects available, categorized into background effects, center effects, clock effects, and image video/background color effects. While the Flying Word effect and the clock effect are non-adjustable, the others can be toggled between fixed and dynamic modes. In fixed mode, the speed and intensity of the effects are predetermined by the user’s settings, whereas in dynamic mode, they are controlled by system hardware readings. For instance, the “Twist into the Abyss” effect will accelerate with higher CPU usage.

In addition to choosing to use the above effects, users can also display their own pictures (JPG, PNG), screenshots, GIF files, videos (MP4), and screen recordings (480×480 pixels).

Using the Screen Capture/Screen Recording feature summons a user-friendly widget displaying a green rectangular frame. By dragging the crosshair within this frame, you can precisely select the area for your screenshot. Once satisfied, simply click the “” icon located at the bottom of the screen to confirm and import the image. This “what you see is what you get” approach proves highly convenient for effortless screen captures.

Customize your system hardware information display by selecting options from the text drop-down menu on the right. Tailor your picture or video with details like CPU temperature, GPU temperature, CPU load, GPU load, water pump speed, and coolant temperature. To accommodate screen size limitations, utilize carousel mode if too many options are checked. Simply set the carousel time interval in the loop option, with the minimum time setting unit being 3 seconds.

Users can enhance their projects by adding an additional layer of images or video through the watermark drop-down menu. This layer can overlay both text and visual effects layers, providing versatility in design. To ensure visibility of underlying elements, it’s essential to adjust the opacity slider appropriately, preventing the watermark from fully obscuring lower layers.

The LED light strips and fan LED light labels flanking the screen offer over ten fully customizable lighting effects. Users have the flexibility to synchronize the fan LED lights with the LED lights encircling the LCD screen or craft their own distinctive lighting combinations, enabling personalized illumination experiences.

The L-Connect 3 software offers a convenient solution for users employing third-party fans with varying LED light counts. Within the Fan LED tab on the GA II LCD page, users can easily adjust the LED light quantity to achieve optimal lighting effects, ensuring seamless integration and customization of their lighting setup.

ARGB Lighting Effect

The installation of the Lian Li GALAHAD II LCD AIO Cooler showcases stunning visual outcomes, especially appealing to enthusiasts who adore vibrant RGB lighting effects. Its dynamic fan lighting further elevates its charm, crafting an aesthetically mesmerizing encounter. Moreover, the CPU Block of the Lian Li GA II LCD 360 boasts dual RGB light strips adjacent to the screen, not only enhancing cooling performance but also adding a visually striking allure.

Testing and Performance

The Galahad II LCD 360 AIO Liquid Cooler underwent rigorous testing on a high-performance setup, boasting an Intel Core i7-13700K processor and MSI MPG Z690 FORCE WIFI DDR5 motherboard. In standard idle conditions, with a room temperature of approximately 28°C, the processor maintained a cool 47°C. Through extensive benchmarking utilizing tools like AIDA64, CPU-Z, and demanding AAA games, we stressed the system to its limits, pushing both the Galahad II LCD PUMP and fan to maximum speeds to accurately assess temperature performance under extreme conditions.

	Test Setup
Motherboard	MSI MPG Z690 FORCE WIFI DDR5
Processor	Intel® Core i7-13700K
RAM Memory	Predator Hermes RGB DDR5 – 6800MHz
Storage	Silicon Power US70 1TB NVMe SSD
Graphic Card	ASUS ROG Strix GeForce RTX 3080 OC Edition (10GB)
CPU Cooler	Lian Li GALAHAD II LCD AIO
Casing	Lian Li O11 Dynamic EVO XL Full Tower Case
Fan	6x Lian Li UNI FAN SL-INF 120 RGB Fans

During a CPU-Z stress test, the processor exhibits robust performance with a power consumption of around 220W and maintains a temperature of approximately 75℃, showcasing excellent heat dissipation. Under ideal conditions, the CPU operates at a lower power consumption of 50W, maintaining a cooler temperature of 47°C, while the fan spins at 420 rpm, resulting in a noise level of 30 dBA. . It can be said to be completely silent, even There was no noise at all late at night.

During the AIDA64 single FPU test, the processor demonstrates robust performance with a power consumption of approximately 250W, boasting a large core frequency of 5.5GHz and a small core frequency of 4.3GHz. Despite reaching a temperature of around 87°C, the heat dissipation remains commendable. This is largely attributed to the exceptional heat dissipation capacity of the Galahad II LCD 360 AIO Liquid Cooler, which effectively manages thermal loads, ensuring optimal performance.

The Galahad II LCD 360 AIO Liquid Cooler demonstrates impressive performance in real gaming sessions. Even in demanding titles like “Red Dead Redemption 2,” where CPU usage exceeds 80%, the temperature remains a cool 65°C. In games like “The Last of Us: Part I” and “Resident Evil 4: Remake,” the CPU temperature hovers around 61-67 degrees. With such efficient cooling, attention shifts to the graphics card, as the CPU maintains consistently low temperatures.

The graphics card’s core temperature sits at around 61°C, showcasing the cooler’s ability to handle heavy gaming loads with ease. Overall, it offers commendable performance, significantly reducing temperatures during intense gaming sessions.

Conclusion

Read Also

• Lian Li Uni Fan SL-Infinity 120 ARGB Fans Review
• TEAMGROUP T-Force Siren GA360 ARGB AIO Liquid Cooler Review
• Yeston Zeaginal ZC-ZEUS XT360 CPU Liquid Cooler Review

The post Lian Li GALAHAD II LCD 360 SL-INF AIO Liquid Cooler Review appeared first on XiaomiToday.

Today, we delve into the realm of the latest ARGB fans from Lian Li, focusing our scrutiny on the Lian Li Uni Fan SL-INF 120. As a company renowned for its premium cases, fans, AIOs, and power supplies, Lian Li brings forth not just a product, but an experience crafted from years of expertise and customer feedback.

At the heart of our examination lies the Lian Li Uni Fan SL-INF 120, a 120mm PWM fan boasting a novel plug-in system designed for impeccable cable management. Its versatility shines through as it proves itself equally adept at serving as a case fan, radiator companion, or CPU cooler. Beyond its performance prowess, this fan dazzles with vibrant ARGB lighting, augmented by infinity mirrors for truly mesmerizing effects, all controllable via the included controller.

With both single and three-piece packages available, and color options of black and white, we embark on our journey to uncover the secrets and strengths of the Lian Li Uni Fan SL-INF 120.

Unboxing

In my first Lian Li product review, I explored their newest release, the SL Infinity Fans. The packaging mirrors the style of Lian Li’s earlier Uni fans, featuring the SL Infinity fan label, the Lian Li logo, and concise text on the front. The sleek black and blue design enhances its visual allure. On the back, there’s a list of package contents and specifications, along with standout features like the single cable setup and the Infinity Mirror presence.

Lian Li offers these fans in packs of three, available in both black and white variants, as well as individual units, also offered in black and white. For the purpose of this evaluation, six single fans were provided for review. Noteworthy distinctions exist between the three-pack and individual offerings, with the former including an additional controller facilitating direct fan connection, obviating the need for motherboard integration.

The contents of the three-pack comprise:

• Three Lian Li Uni SL-INF 120 fans
• One controller
• Four cables for controller connectivity
• One cable for the motherboard connection
• Twelve fan screws
• One ARGB Y-cable

Conversely, Pack 1 contains:

• One Lian Li Uni SL-INF 120 fan
• One fan Y-cable
• One RGB Y-cable
• One connection cable for the Lian Li Strimer Plus controller
• Four fan screws

Closer Look

The Uni Fan SL-Infinity impresses with its top-notch build quality, premium materials, and precise design. Lian Li offers it in a stylish Black variant, enhancing its visual charm. Its front side features translucent fan blades with seven blades and a mirrored center cap, perfectly embodying the Infinity style. Despite being mainly made of sturdy plastic, the chrome-plated side strips add a touch of elegance to its appearance.

The Uni Fan SL-Infinity 120 RGB boasts front and rear illumination, with C-shaped diffusers enveloping milky, cloud-like strips housing RGB lights in octagonal forms. Its mesmerizing visual display includes captivating RGB lighting effects along the frame’s sides and at the fan’s center, creating a stunning 3D deep infinity mirror effect using a 0.5mm layered technique.

The rear side of the Uni Fan SL-Infinity 120 RGB showcases the prominent Lian Li logo embedded within the central cap, exhibiting a sleek aluminum finish. Notably, the fan’s housing boasts a greater thickness compared to conventional 120mm fans. While typical designs prioritize accommodating large fan blades for optimal airflow, the Uni Fan SL-Infinity 120 RGB diverges from this norm by allocating space for both illumination and its distinctive infinity design along the sides.

The Uni Fan SL-Infinity 120 RGB features a fluid dynamic bearing and operates at speeds of up to 2100 RPM, a significant increase over previous models. With an airflow rating of 61.3 CFM and a static pressure of 2.66 mmH2O, it surpasses its predecessors in performance, making it ideal for radiator applications. Its motor assembly is supported by four twisted arms, one of which has a thicker profile to accommodate wiring for both fan operation and integrated LED illumination of the translucent fan blades.

The Uni Fan SL-Infinity 120 RGB offers an innovative design for seamless fan connection, supporting up to four fans. Its pin-to-pad contact points efficiently transmit signal and power for optimal performance. Using interlocking plastic “keys,” users can easily daisy-chain fans for quad 120 mm radiator setups, simplifying cable management. Treating the two sides separately enhances performance, which is ideal for push-pull fan configurations.

The Uni Fan SL-Infinity 120 RGB features a sleek design that allows fans to connect seamlessly, reducing cable clutter for a clean look. With a single cable connecting the entire chain to a controller or motherboard, users can enjoy a hassle-free installation. Lian Li’s Infinity design emphasizes simplicity and efficiency, maintaining the brand’s commitment to quality and ease of use for both enthusiasts and professionals.

The biggest change this time is on the side of the fan. The left and right sides of the fan are changed to the design of infinity mirrors, and protective stickers with high light transmittance are thoughtfully included when leaving the factory to protect the mirror surface from scratches.

The latest fan design features latches, gold fingers, and metal contact points situated in the middle, a shift from previous models. Notably, latches, such as the UNI FAN SL, now sport a detachable design requiring just a 90-degree rotation for removal. This redesign enhances both convenience and aesthetics when installed on chassis or radiators, offering a sleek and user-friendly solution.

Easy Installation

After seeing the appearance, let’s take a look at the actual installation. The splicing and installation techniques of the UNI FAN SL-INF 120 are those of its predecessors. Aligning the tenon positions and exerting upward pressure completes the installation seamlessly. The number of fans one wishes to splice together remains at the discretion of the user, with a single set of connecting cables accommodating up to 4 fans.

Following the fan splicing, the subsequent step involves connecting the power cord, marked by several notable alterations. Notably, the relocation of the gold finger and metal contact point to the central area of the power supply introduces an element of intrigue to the connection mechanism. Despite employing latches for installation, the wiring now offers adjustable outlet directions, owing to this design adjustment.

The addition of a detachable upper cover to the power supply chip is a notable improvement. This allows users to customize their wiring setups to meet individual needs, like positioning water cooling drains. Whether for typical setups or water-cooling configurations, these changes offer increased flexibility and ease of use.

The latest UNI FAN SL-INF 120 model showcases a significant advancement by reducing connecting wires. Previously necessitating two separate wires for ARGB and PWM, it now integrates both functionalities into a single 7-pin connection line, simplifying installation. This consolidation not only streamlines wire management but also enhances the ease and aesthetics of setup. It’s worth mentioning that while the 3-pack version adopts the new module cable and 7-pin connector, individual single packages still employ a 4-pin PWM connector and a 3-pin 5V ARGB connector for direct motherboard connection.

L-Connect3 Software and RGB Lighting

Lian Li introduced L-Connect, tailored for controlling the lighting effects of the UNI FAN SL-INF fan. Over time, L-Connect has undergone continuous upgrades, leading to the recent release of L-Connect3. This latest version boasts numerous enhancements compared to its predecessors, featuring a revamped user interface with added entries and functions organized into categories like System Information, speed settings, synchronized and fan lighting effects, and function settings. These improvements streamline usability, providing gamers with a more intuitive experience.

L-Connect 3 software’s homepage offers instant access to utilization status. In the speed settings section, users can customize fan start/stop parameters, speed curves, and fixed speeds. The function settings page includes options for language preferences, temperature adjustments, and software updates.

Notably, the light synchronization feature enables precise control over fan lighting effects, allowing users to adjust illumination preferences for fan blades, center mirrors, frames, and side mirrors, or choose comprehensive lighting effects.

The UNI FAN SL-INF 120 boasts advanced lighting features surpassing its predecessors, yet maintains the familiar user-friendly software control. It offers preset lighting effects like tide, mixing, and current, alongside customizable options for both fan blades and inner frame edge, catering to individual preferences with sophistication and ease.

Lian Li’s L-Connect 3 interface offers a seamless solution for users who utilize SL, AL, and SL-INF three-generation fans and aim to synchronize lighting effects. With L-Connect 3, effortlessly synchronize lighting effects across all Lian Li peripheral devices. Additionally, the software’s synchronization motherboard function enables users to sync lighting effects across all compatible devices with a single click, simplifying the integration process.

Testing and Performance

We evaluated the performance of the Lain Li UNI FAN SL-INF 120 fans in our system by measuring their effectiveness during idle, gaming, and full-load scenarios using AIDA64 Extreme. Conducted over a 30-minute period in a room with a temperature of approximately 28°C, our tests employed an Intel 13th generation i7-13700K processor running at default settings, paired with an MSI MPG Z690 FORCE WIFI DDR5 motherboard.

Notably, no overclocking was applied. Throughout the tests, the AIDA64 Extreme software facilitated the replication of high-load conditions. During idle, the CPU temperature stabilized at 47°C.

	Test Setup
Motherboard	MSI MPG Z690 FORCE WIFI DDR5
Processor	Intel® Core i7-13700K
RAM Memory	Predator Hermes RGB DDR5 – 6800MHz
Storage	Silicon Power US70 1TB NVMe SSD
Graphic Card	ASUS ROG Strix GeForce RTX 3080 OC Edition (10GB)
CPU Cooler	Lian Li GALAHAD II LCD AIO
Casing	Lian Li O11 Dynamic EVO XL Full Tower Case
Fan	6x Lian Li UNI FAN SL-INF 120 RGB Fans

According to the graph, our test system consistently maintains a safe temperature range without reaching critical levels. While idle, it remains between 47°C and 50°C. During demanding gaming sessions with Cyberpunk 2077 (2.0) and Red Dead Redemption 2, both known for their CPU intensity, temperatures range from 61°C to 67°C after 30 minutes. Under stress testing with AIDA64, we observed temperatures of 70°C at 2200 RPM and 73°C at 1200 RPM, with even a minimal fan speed of 420 RPM keeping temperatures comfortably below the critical threshold of 77°C. These results demonstrate impressive cooling efficiency.

The Lian Li UNI FAN SL-INF 120 RGB Fans operate quietly up to around 1200 RPM, hardly noticeable within a closed system. At 1800 RPM, a faint noise emerges, becoming more noticeable but not bothersome. Even at full speed, the fans are audible but not disruptive, though running them at maximum isn’t typically necessary for normal use. These assessments are based on actual measurements, though individual experiences may vary depending on factors such as room temperature and personal hearing sensitivity.

The system boasts a formidable setup, featuring six or seven 120mm fans, robust water cooling, and a 360 radiator. This configuration delivers exceptional performance in gaming scenarios, facilitating overclocking with ease. Tests underscore the LIAN LI UNI FAN SL-INF fans’ prowess, excelling in cooling performance and adaptability for CPU coolers and radiators. Notably, the system maintains a manageable noise level, ensuring a satisfying user experience alongside its impressive cooling efficiency.

Conclusion

Read Also

• Lian Li GALAHAD II LCD 360 SL-INF AIO Liquid Cooler Review
• TEAMGROUP T-Force Siren GA360 ARGB AIO Liquid Cooler Review
• Yeston Zeaginal ZC-ZEUS XT360 CPU Liquid Cooler Review

The post Lian Li Uni Fan SL-Infinity 120 ARGB Fans Review appeared first on XiaomiToday.

The post Lian Li Introduces the Lancool 207 ATX Mid-Tower Case appeared first on XiaomiToday.

A New Form Factor

The EDGE power supply series boasts a versatile T-shaped design, tailored for vertical installation in dual-chamber cases. This unique design features an outward-facing modular strip, significantly simplifying wiring for a cleaner and more organized setup. A standout feature of the EDGE series is the built-in 4-port USB expansion hub, which allows seamless connectivity for RGB devices, fans, and controllers, reducing the number of wires leading to the motherboard and making installation more straightforward.

Aesthetically, the EDGE series is designed to impress. It showcases an embossed mesh design with 66.9% porosity, ensuring optimal airflow and cooling. Paired with a 120 mm fan, this design enhances heat dissipation while maintaining a sleek and modern appearance.

Certified Quality

The EDGE series power supplies are equipped with industrial-grade EPCOS and Japanese capacitors, known for their robustness and reliability. These capacitors can handle temperature spikes, vibrations, harsh environments, and broader temperature ranges, resulting in increased durability and longevity. Additionally, the power supplies include multiple protection mechanisms such as Over Current Protection (OCP), Over Voltage Protection (OVP), Over Temperature Protection (OTP), Over Power Protection (OPP), Short Circuit Protection (SCP), and Under Voltage Protection (UVP).

The LIAN LI EDGE series has been rigorously tested and holds multiple certifications, including 80Plus Platinum, Cybernetics Platinum, and PPLP Platinum, guaranteeing top-tier efficiency and performance. LIAN LI further backs these power supplies with a 10-year warranty, ensuring exceptional reliability and peace of mind for users.

Custom Cables

LIAN LI has paid special attention to cable quality in the EDGE series. The power supplies come with high-quality braided sleeved cables for the 20+4 pin, CPU, PCIe 6+2 pin, and 12V-2×6 (12VHPWR) connectors. These cables, along with pre-installed cable combs, allow users to achieve tidy and organized cable runs effortlessly.

The 12VHPWR cables are particularly notable for their custom-molded 12+4 connectors, ensuring reliable power delivery. The dual-color shell of these connectors indicates correct insertion, enhancing user convenience and safety. The cables are designed for durability, featuring thicker and stronger terminals with lower contact resistance and a robust wire-to-terminal soldering process.

For SATA power, the LIAN LI EDGE series includes a Y-Type SATA cable, ideal for reaching drives and controllers located far apart, and a 300mm Close-Type with 15mm spacing, making it convenient to connect multiple devices with minimal cable clutter.

Availability

The LIAN LI EDGE PSUs are available starting July 5th, 2024. Initially, the series will include 1300W and 1000W models, with the 850W models scheduled for release at a later date. The power supplies are available in both black and white variants.

For more information on the LIAN LI EDGE PSU, please visit LIAN LI EDGE PSU.

The post LIAN LI Introduces EDGE Series Power Supplies For Dual Chamber Cases appeared first on XiaomiToday.

Revolutionary Design with Minimal Tubing

The hallmark of the HydroShift LCD 360 series is its innovative tubing design that minimizes visible tubing for a cleaner, more streamlined appearance. The tubes are cleverly concealed to the side of the radiator, utilizing durable and flexible ribbed tubing commonly seen in water-cooled servers. This design not only enhances aesthetics but also ensures optimal performance and longevity. The tubing sits flush against the radiator, facilitated by two pre-installed retention brackets that help with routing. Additionally, the system includes a full-length brushed aluminum plate and left/right tube cover plates, along with a pump mounting hardware cover, to ensure a polished and professional look.

HydroShift LCD 360S: Silent Yet Powerful

The HydroShift LCD 360S is equipped with a newly designed pump that operates at 3800 RPM. This upgraded pump design includes enhanced propellers and water channels, which improve performance while reducing noise levels. The pump features two main cables: one for motherboard synchronization using PWM and another main cable that splits into SATA, PWM for the fans, and USB 2.0 for L-Connect communication. To maintain a tidy appearance, two tube clips are provided to route the main cable along the back of the tubes.

The radiator, measuring 27mm in thickness, comes pre-installed with 28mm non-RGB fans designed for quiet operation without sacrificing performance. These fans can reach speeds of up to 2500 RPM and are compatible with the UNI FAN P28’s side ARGB kit, offering users the flexibility to customize their cooling setup.

HydroShift LCD 360R: Enhanced Performance

The HydroShift LCD 360R takes cooling performance up a notch with a slightly larger propeller than the 360S, allowing it to operate at speeds of up to 3200 RPM. This model features a single cable solution that combines SATA for power, PWM for fan daisy-chaining, and USB 2.0 for L-Connect communication, simplifying installation and cable management.

The 360R includes a 31mm thick radiator and pre-installed 28mm thick ARGB and PWM fans, which can reach speeds of up to 2400 RPM. The ARGB cable for the radiator fans is discreetly routed inside the tube braiding, connecting inside the pump block for synchronization via L-Connect, ensuring a seamless and visually appealing setup.

Lian Li HydroShift LCD 360TL: The Ultimate Solution

For users seeking the ultimate in cooling and aesthetics, the HydroShift LCD 360TL offers a top-of-the-line solution. This model features the same 3200 RPM pump and radiator as the 360R but includes three pre-installed UNI FAN TL fans, providing a distinctive look. The cable from the pump can be routed behind the tubes and connects to the daisy-chained TL fans and the included TL hub, offering a single cable solution. This setup allows full control over the pump and fans through L-Connect 3, providing a user-friendly and highly customizable experience.

Availability and Pricing

The Lian Li HydroShift LCD 360S, 360R, and 360TL AIOs are available in both black and white and come with a comprehensive 6-year warranty. These cutting-edge AIO coolers are available for pre-order starting June 28th, 2024, with the following MSRPs:

• HydroShift LCD 360S: $179.99
• HydroShift LCD 360R: $199.99
• HydroShift LCD 360TL: $259.99

For more detailed information about the HydroShift LCD AIO series, please visit the LIAN LI product page.

About LIAN LI

LIAN LI Industrial Co. Ltd. has been at the forefront of PC chassis and accessory design and manufacturing since 1983. Known for its commitment to quality, innovation, and design, LIAN LI continues to set industry standards with its range of high-performance and aesthetically pleasing products.

With the launch of the Lian Li HydroShift LCD 360 AIO series, LIAN LI reaffirms its dedication to providing cutting-edge solutions that cater to the needs of gamers, PC enthusiasts, and professionals alike.

Specifications

The post LIAN LI Launches HydroShift LCD 360 AIOs: New Design Offers Tube Routing For a Clean Minimalist Look appeared first on XiaomiToday.

Merging Cutting-Edge Design with Luxury

The Lian Li O11D EVO RGB case is already celebrated for its innovative design and robust features. This new co-branded version maintains the foundational elements that have made the original case popular while incorporating exclusive Lamborghini design cues.

One of the most striking features is the Lamborghini logo, prominently printed on the lower part of the front glass panel. This instantly recognizable emblem adds a touch of luxury and prestige. Enhancing the supercar aesthetic, the right front pillar of the case is crafted from carbon fiber, a material synonymous with high performance and sleek design. Additionally, each case features a co-branded nameplate embedded in the center of the right panel, highlighting its limited edition number, further enhancing its collector’s appeal.

Performance Meets Style

Despite its luxurious enhancements, the Lian Li O11D EVO RGB case does not compromise on performance. It retains all the advanced features of the regular O11D EVO RGB case, making it a top choice for PC enthusiasts and builders.

The case supports E-ATX motherboards, accommodating high-end setups with ease. It is compatible with graphics cards up to 455.7mm in length, CPU coolers up to 167mm in height, and power supplies up to 220mm in length. This flexibility ensures that builders can install the most powerful components available without space constraints.

The O11D EVO RGB case is also designed with cooling efficiency in mind. It offers a total of ten fan positions, strategically located to maximize airflow and cooling performance:

• Top: Supports up to three 140mm or 120mm fans and is compatible with 360mm or 420mm radiators.
• Side: Supports up to three 140mm or 120mm fans and is compatible with 360mm or 280mm radiators.
• Bottom: Supports up to three 140mm or 120mm fans and is compatible with 360mm radiators.
• Rear: Supports one 120mm fan.

This comprehensive cooling capability ensures that the system remains cool even under heavy loads, making it ideal for gaming, content creation, and other demanding applications.

Advanced Connectivity and Customization

Lian Li’s commitment to modularity and customization is evident in the O11D EVO RGB case’s IO interfaces. It features a modular multi-position design, providing flexibility in setup and ensuring easy access to connectivity options. The case includes two USB 3.0 Type-A interfaces and one USB 3.1 Type-C interface, catering to a wide range of peripheral devices and ensuring high-speed data transfer.

The case is also equipped with a 1.5mm wide L-shaped ARGB light strip on both the top and bottom, allowing users to customize the lighting to match their aesthetic preferences. This feature, combined with the sleek Lamborghini-inspired design, makes the O11D EVO RGB case a standout piece in any setup.

A Collector’s Dream

The Lian Li and Lamborghini O11D EVO RGB case is more than just a high-performance PC case; it’s a collector’s item. The limited production run of 6,498 pieces means that each case is a rare and exclusive piece of hardware! perfect for both Lamborghini enthusiasts and PC builders who appreciate luxury and performance.

In conclusion, the collaboration between Lian Li and Lamborghini has resulted in a PC case that not only meets the high standards of performance and functionality but also exudes the luxury and exclusivity associated with the Lamborghini brand. The O11D EVO RGB case is a testament to what can be achieved when two industry leaders come together! blending the best of PC hardware design with the allure of a world-renowned supercar manufacturer. This limited-edition case is sure to be a coveted item among PC enthusiasts and collectors alike.

The post Lian Li Launches Exclusive Lamborghini Co-Branded O11D EVO RGB Case appeared first on XiaomiToday.

LANCOOL 207: Compact Yet Powerful

The LANCOOL 207 redefines compact case design with its M-ATX size while maintaining ATX compatibility. To achieve this, LIAN LI has innovatively lowered and recessed the motherboard tray within the cable management chamber and repositioned the PSU mounting to the front with the ports facing the left side panel for direct access. This clever arrangement allows the LANCOOL 207 to support ATX motherboards, 360mm AIO coolers at the top, GPUs up to 410mm in length, and PSUs up to 160mm in length. The case features two pre-installed 120mm PWM fans hidden within the PSU shroud and two 30mm thick 140mm ARGB fans with infinity mirrors at the front, ensuring optimal cooling performance in a sleek, compact frame.

LANCOOL 217: Where Style Meets Performance

Embracing a unique blend of technology and lifestyle aesthetics, the LANCOOL 217 is accented with real wood, offering a visually striking and functional design. The case includes dual-layer dust protection at the front, comprising a mesh panel and a removable inner fan filter. Pre-installed with 170x170x30mm front fans, the LANCOOL 217 ensures excellent CPU and GPU cooling, complemented by a “cleaning mode” button that reverses the front fan blades to clear out dust. Additionally, the case supports up to three 120mm bottom fans for enhanced airflow. Its compatibility with both regular and back-connect motherboards makes it a versatile choice for various build configurations.

O11 VISION Compact: Sleek and Versatile

The O11 VISION Compact, a smaller version of the popular O11 VISION case, retains the height and depth of its predecessor while being wider for better GPU compatibility and airflow. It offers two top panel options: a glass panel for a seamless three-glass look, and a mesh panel with a bracket for supporting up to 360mm AIO coolers. When the AIO is side-mounted, tubes can be hidden in the second chamber for a clean, tubeless appearance. The case supports horizontal GPU installation with an anti-sag bracket and features a rotatable PCIe expansion slot panel for vertical GPU support. Its compatibility with both regular and back-connect motherboards further enhances its appeal to PC builders.

Wireless Control Revolution: Strimer Plus V3 and UNI FAN SL V3

LIAN LI is set to revolutionize PC case accessories with the introduction of a groundbreaking wireless controller for its UNI FANs, Strimer cables, and AIOs. This new technology addresses the perennial challenge of managing multiple controllers for different product lines and generations. The UNI FAN SL V3 and Strimer Plus V3 will be the first to incorporate this innovative wireless control, promising a seamless and enhanced user experience. The first prototypes of these cutting-edge products will be unveiled at COMPUTEX 2024, marking a significant leap forward in PC accessory design and functionality.

LIAN LI x SignalRGB: Unified Lighting Control

In an exciting collaboration with SignalRGB, LIAN LI will present a beta version of L-Connect 3 embedded with SignalRGB at COMPUTEX 2024. This partnership aims to offer a streamlined and convenient method for controlling lighting effects across all PC components, including motherboards, graphics cards, and memory. This integration will significantly enhance the user experience by providing unified and intuitive lighting management, setting a new standard for customization and control in the PC building community.

LANCOOL 216 RGB: Award-Winning Cooling Performance

Adding to the excitement, the LANCOOL 216 RGB has received the highest S Rating from the PPLP Lab, a renowned hardware component test lab known for its rigorous testing with Chroma equipment. This ATX mid-tower case is among the first products to earn the prestigious PPLP Chassis Star rating, thanks to its superior cooling performance. The LANCOOL 216 series, designed specifically for enhanced cooling capabilities, has outperformed open platforms to achieve the highest S-level cooling rating, solidifying its reputation as a top-tier choice for PC builders.

Visit LIAN LI at Computex 2024

For those eager to explore the latest in PC case design and accessory innovation, LIAN LI’s booth at Computex 2024 is a must-visit. The company’s commitment to blending aesthetic appeal with cutting-edge technology ensures that its new product lineup will impress both enthusiasts and professionals alike.

For more information on the LIAN LI products announced at Computex 2024, visit LIAN LI Computex 2024.

The post LIAN LI Reveals New Case, Accessories, and Software Prototypes at Computex 2024 appeared first on XiaomiToday.